Atieone' Gold

Made of 18k gold, weight at about 7gm. Was specially fabricate for a customer that prefer a class of his own, with combining his name and his lovely wife name influence me to design the 'Atione'.'Atione' is a very fine handmade gold ring, the inner layer surface was blasted with sandy textured. And the upper layer font surface clean with shinning gold.It takes time to finish this 'Atione' when comes to detailing parts especially the fonts, and the and product quality. Smaller size of this ring we increasing the workmanship cost, however bigger ring will increasing the material cost.

Read more...

Tie Clip & Brooch for Kesas

This is a set of Tie Clip & Cufflinks and a piece of Brooch, I designed it specially for Kesas Highway annual dinner corporate gift. It was made of sterling silver and plated with 18k gold. Kesas is a company thats operating highway in Kuala Lumpur, the highway connecting from Bukit Jalil to Kelang.
The Brooch is for the ladies and the tie clip & cufflinks are for the gents. The brooch had 10pcs of 2.0mm diameter of cubic zirconia and 3pcs of 3mm cubic zirconia, all are set pave'.The tie clip and cufflinks had a piece of 1.8mm of cubic zirconia each. The wording 'KESAS' and 'E5' was plated with white gold, it is to highlighten up the Kesas company name. The cufflinks was designed based from the Kesas logo, where the roads never ends!
However this fine box was made in Thailand, i ordered it specially with the gold printed of Kesas Highway logo as suggested by the CEO of Kesas. This project was done by me in 2004 while doing my Honest Degree in Jewelry Design in MARA University of Technology Shah Alam.
Read more...

Custom Handbags DIY!

Today I would like to share with you guys how to make your own handbags! I will show you guys some simple steps and techniques that can be followed. This handbag had been done by me and my fiance with combining manmade and nature materials as Mengkuang' or known as 'Pandanus leaf', synthetic leather or known as vynil, 'Tie & Dye' fabric using 'batik' dye, strawboard as based material, and offcourse dunlop glue. Firstly glue the board surfaces all over and let it dry for a few minutes. Before that cut the board depend on whut size do u want your handbag to be.
Then glue also on the 'tie&dye' fabric (backside) to be paste on the board. You also can used any material as you like rather than using this handmade 'tie&dye'. Then stick both glued surfaces together (the 'tie&dye' with the glued board). Remember to wait untill both glued surface really dried before you paste it together.
And the result should be like this:
For this handbag i pasted a layer of vynil at the bottom of the bag for more durablity:
Next is to paste another piece of vynil on the left and the right of the bag (the hollow side). Always remember to put both surface with glue and wait untill it dried before sticking it together.
And the result should be like this:


Now its time to make the accessories for this bag. Im using a piece of 'Mengkuang' woven and make it into belts: fold both side and glued it together:

After making the 'mengkuang' belt, i paste it onto the bag as shown below, always remember to glue both side of the material and wait untill it really dried before sticking it together.

Then to make this bag more intresting, I decided to paste another layer of 'mengkuang' at the bottom of the bag.

Cut the remnnence and fold the end properly.

You can add any accessories for your bag such as studded, zip, buttons, anything that u wish! Now the bag is ready to use or for runaway acessory! Thats all for today, Gud luck and happy trying!



Read more...

The Prime Minister's Ideology Transforming Felda's Craftpeople

On every 7th Julai at every year, Felda organizing the 'Settlers Day'. It is the most important yearly event for Felda. This convention participating international delegates and also among all Felda settlers.
My Job is to create a display that shows the future of handicrafts products that made by Felda settlers. This task is a phsycologic game for me to answer the point of the main idea of our former Deputy Prime Minister (now our new PM) Datuk Seri Najib Tun Abdul Razak.
His idea, and im the realizer. So i create a concept of future display for this showcase with minimal budget, and the concept is garden living open space with the tag 'Modern Living'.

The garden living opens up people mind from stereotype living in a hallroom! lets get out from the hall and enjoy our living in a friendly eco lifestyle!
He always comment about the umbrella.
Before and after!
The garden dining setting
its time to sleep with the lavender bed set! with the etchic modern rattan bed.
down; my fiance helping to draping the net. Garden Spa
From the hall of Putrajaya International Convention Center
the Designer team that solves all the problems! me, hafiz razak, ahmad nazren.
A true designer is the one who done the problem solving. By Designing, a problem could be solve or can make things easier. A true designer should can solve every designing problems dosent matter in whut type of it looks alike, from wood to stone, from organic to cubic, from original to synthetic, its a job for EVERYTHING UNDER THE SUN!



Read more...

Showcase Satu Daerah Satu Industri

This is the last year project for SDSI held at MITC Malacca.

I design the whole concept for this showcase, most of the products i recycle it from the previous showcase held in Putrajaya International Convention Center (PICC) a month before.

under: small landscape area for edible plant 60sqf
In this SDSI Showcase we highlighted Tenun Products and Apparel as our main subject, we also added up foods industry from Felda community.



under: dress from Tenun Silk designed by my fianceTenun men's tunic and ladies kebaya design by heri love this Tenun Kimono with grey legings The whole idea from the top management of Felda influence me to create this.


Read more...